A Blog To Watch 'Frogger' Review By: Mike Razak

I’ve been reviewing watches for eight years now, including the last four at aBlogtoWatch. While I’ve handled my fair share of Doxa watches at events and meetups, and I’ve long had my eye on the Doxa Army, I’ve never spent more than a few minutes with one until now. While the new Doxa Sub 300 Beta ‘Frogger’ — a collaboration with California retailer Belmont Watches — might not have been my first choice out of all the models the brand offers, I was thoroughly impressed with it, and I now find it near the top of my “What Doxa would I buy?” list.

Doxa uses the word “urban” twice in its description of the Sub 300 Beta, and I still don’t know what the hell the brand means by it. What I can tell you is that the Beta differs from the core Sub 300 in that it’s thinner, has a different bezel (and crown), and features an absolutely critical helium escape valve. There are other differences I’ll mention, but those are the things you’d notice right away if you had them side by side. (Which I didn’t. Obviously.)

The “Frogger” edition, according to Belmont, is meant as “a tribute to the origins of America’s underwater warriors — the Navy Underwater Demolition Teams, or “frogmen.” It’s a fitting tribute, given that Belmont Watches is in San Diego, California, and the Navy SEAL, into which the UDTs were consolidated, have been based just off the coast of the city in Coronado since 1945.

There are a few things that make the Beta and this Frogger editions stand out. The first is common to all Sub 300 Betas: Instead of the split-scale metal bezel and matching crown, you get an all-black ceramic bezel, with a matching crown. The numeral colors depend on the colorway you choose, but unique to this limited edition is the use of a brighter, higher contrast hue for the internal timing scale. On most Doxas, the outer no-decompression scale (which tells you depth-based limits for dives that can be completed without decompression stops) gets the brighter color. On the steel bezels, that doesn’t really matter, as the inner scale is done in black and is plenty legible. On most Betas, though, you basically can’t see the inner scale, rendered as they are in black. The Frogger swaps the color scheme, giving you a bright orange timing scale and a deep green no-decompression scale to match the dial. I think this actually makes sense, given the Beta series is aimed more at landlubbers, and the timing bezel is far more useful to those types.
The bezel is incredibly easy to grip and provides a truly satisfying tactile experience, thanks to it’s raised profile and sawtooth design. There’s absolutely no play to when turning, and each of the 120 clicks provides a crisp feel and sound. I’m no diver, but if I were, I’d feel very safe with this on the wrist. At least as far as the bezel goes. Again, I don’t dive, so this may be a truly dangerous thing to have on your wrist. Contact your local PADI chapter for more info.

Then there’s the helium escape valve, which you can also find on the 1200m-rated 300T, but feels less necessary here [read: it’s an aspirational affectation]. The less said about it the better, but at least it’s not as obtrusive as the Seamaster’s valve.

Finally, the bracelet. First and foremost, all Doxas look better on their bracelet or the fitted rubber the brand provides with some models. Though the latter has the unfortunate tendency to meaningfully increase the lug-to-lug, I think both create the best looking appearance on the wrist. The 20mm lug width does allow the watch to accommodate third-party straps rather easily, but I’d try to resist temptation. The included bracelet is completely brushed, which is a change from the normal beads-of-rice that has polished beads. This gives the watch a more rugged look that I think is befitting not only this special edition, but Doxas in general. The clasp is a bit ho-hum, but it gets it’s job done with a ratcheting micro-adjustment system that’s by no means new, and may not even be proprietary, as I’ve seen very similar mechanisms on Midos and other watches.

That said, the benefit of a sub-12mm-thick watch is that you can put a NATO on it. Belmont includes a classic green textile pass-through strap with the Frogger, and it’s a perfect if obvious match. Thanks to that slim profile, it doesn’t make the watch too thick. In fact, it lifts it up so it’s about as thick as the standard Sub 300! I didn’t find anything special about the strap itself. It seemed to be of high quality, but wasn’t close to something you’d get from Omega or other brands that offer $300 NATO straps. And I need to be clear that spending $300 on any NATO strap is lunacy.

The best thing about the Frogger edition is the dial. Specifically, it doesn’t use the gimmicky wave dial of the standard Betas. It seems that the last five or so years have seen an explosion of brands using wave dials, perhaps in an effort to differentiate themselves, or just be more attractive to a broader consumer base. I don’t know, and I also don’t know why it didn’t happen sooner; Omega has been using its wave dial since it introduced the Seamaster Diver 300M in 1993. What I do know is that I think it’s contrived in almost every iteration and brands need to knock it off. And that’s why this edition from Belmont is a winner for me. It takes the tired wave dial, tosses it out the window, and replaces it with a grained deep-green dial.

For this limited edition, Belmont Watches has replaced the usual sailboat with a relief map of Coronado Island, the aforementioned home of the Navy UDTs. The map extends to the mainland, and while it isn’t marked, Belmont Watches is located within the depiction (just under the ‘D’ in San Diego). The caseback is individually numbered out of 100, and screws down to seal in the Swiss automatic Sellita SW200-1 movement. Doxa forgoes the COSC chronometer certification that it obtains for it’s Sub 300 watches, so the movement is presumably set at factory accuracy and delivers a minimum power reserve of 38 hours at 28,800 vph. Keep in mind that the Beta was released over a year before Sellita released the SW200-2 with it’s upgraded power reserve, so it’s not unreasonable for Doxa to keep using the Sw200-1 for a bit longer. It may even choose to do so indefinitely if the cost increase is significant.
My understanding is that Doxa Bros see the Sub 300 Beta as a bit of an incursion on the purity of the Sub 300. Those in love with the historic Doxa see it as modern folly, while newcomers (perhaps those of a more welcoming viewpoint) see it as a solid model. I’ve spoken to some in the former camp that begrudgingly acknowledge that they are far better in person but stop short of publicly admitting any sort of like for them. I think that’s a stubborn, narrow-minded point of view. A brand, and a model, can exist with a new or different version. Doxa makes no fewer than five versions of the Sub 300, not including limited editions like this; each has its merits, and I’m sure each draws its share of ire. For my part, as a newcomer and someone who doesn’t care much for intransigent adherence to historicity, I think the Sub 300 Beta is a fantastic Doxa, and this Frogger edition, with it’s omission of the wave dial, brushed bracelet, and tweaked bezel coloring, may be the best of the bunch. The Doxa Sub 300 Beta “Frogger” is priced at $2,890 USD and limited to 100 pieces. For more information, please visit the Belmont Watches website. To learn more about the Doxa Sub 300 Beta, please visit the Doxa website.
Full Blog Post by "A Blog To Watch": https://www.ablogtowatch.com/my-first-doxa-review-the-sub-300-beta-frogger-collab-watch/